QH 5045 V2
Hybrid Source Element
The single hybrid array unit QH 5045 V2 (newly developed high frequency unit) has a dispersion of 50° horizontal and 45° vertical. The hybrid array element is an absolute novelty in the combination of line source and point source technologies. The QH 5045 V2 contains four 1“ high frequency drivers which are coherently working on a waveguide guaranteeing a precise dispersion and seamless transition of the high frequencies between the array elements. The two hornloaded mid range systems are equipped with 10“ neodymium speakers. In this system the requirements for compact dimensions, highest SPL and defined dispersion of a line array are combined in a symbiosis. The QH 5045 V2 is optimized for clustering of maximum three units both in groundstacking and flying mode. Furthermore, thanks to the integrated flange, the operation on a high stand is possible.
Find a dealerfor quote request note
Specifications
| Components | 2x 10“ hornloaded + 4x 1“ neodymium |
|---|---|
| Dispersion (h x v) | 50° x 45° |
| Nominal load (AES / program) | 700 / 1400 W |
| Impedance | 8 ohms |
| SPL nom. (Fullspace@1W/1m) / max. SPL (at AES nominal load) | 107 / 137 dB |
| Frequency range (-6 dB) | 120 Hz - 20 kHz |
| Dimensions (W x H x D) | 450 x 800 x 370 mm |
| Weight | 34 kg |
| Connectors | 2x Speakon NL 4 |
| Finishing | PU coating (black) |
| Mounting threads | 8x M10 (4x top- and 4x bottom side), 1x M10 safety thread |
| Crossover frequency | 1800 Hz |
| Special features | 6 x side mounted handles |
| Protective grille | high protective comb grid with acoustic foam |
| Protection class | IP 44 |
In use / reference projects
This product is used in these reference projects:
compatible system amplifier
Powersoft Touring Powersoft T304 A
The T Series is a flexible and cost effective amplifier platform loudspeaker processor. The model delivers high peak voltage allowing high SPL with single 8/16 ohm cabinets. The high voltage is also good for sharing power between the channels for applications such as bi-amped loudspeakers or subwoofers with passive tops.
Digital Amplifier DA 230
- No longer available –
The DA 230 is a fully digital multi-channel power amplifier with extensive audio DSP functionality and two Class D power amplifiers of the latest generation. Practical operating gestures make the handling of even complex functions very easy, such as the preset settings on the device.
Pano | QH 5045 V2 compatible products and accessories
High Power Subwoofer QLB 118 X
The direct-radiating high-performance subwoofer is equipped with a new developed 18” subwoofer with tetra coil & dual voice coil. The tunnel design of the bass reflex casing has been optimized to minimize air flow noise. These innovations distinctly increase the sound and reproduction quality. Hence the QLB 118 X sound tight and feature a proper impulse response without loosing the deep bass reproduction of a 18“ subwoofer. It is recommended as a universal subwoofer for creating powerful bass arrays in combination with the line array and hybrid elements of the PANO series. Its mechanical construction provides the KME typical stability. Functional details set new standards – perfectly placed handles, stacking elements and the QLB 118X with the integrated Quick Release Hardware system which enables flying and groundstacking in combination with the PANO line array elements.
More Accessories Speaker Tilt Adapter
The speaker tilt adapter is universally applicable and continuously adjustable. The tilt adapter in matt black and roadworthy design can be attached to all 35 mm speaker stands or poles and is centrally loadable with up to 35 kg. The inclination can be continuously adjusted from 0 ° to 35 °.
