Donau-Lauchert-Halle Sigmaringendorf (Germany)

Renewal of lighting and sound technology

The central approach for this project is the use of the high suspended, horn-loaded tops with a high-frequency waveguide Pano QH 5045 V2 with which the entire hall can be covered effortlessly up to the last row under the gallery. Due to the precise beam angle, reflections on the side wall and the glass front can be prevented. The zones not reached by the tops in front of the stage are effectively filled with four discreet frontfills VersioX VLX 2 on the edge of the stage. Three suspended Fisco ICS 5 are installed as delayline for the gallery. With two high-performance Versio VB 218 subwoofers underneath the stage, the sound system is now well suited for powerful music reproduction. All system parameters are stored in the digital system output stages DA 230 with 2x 1500 W each and DA 428 with 4x 700 W each.

Two VersioX VLX 12 are suspended from the side for monitoring on stage, and two mobile MCX 12 can be flexibly connected as required.

In the foyer, Fisco ICS 5 was also installed upright as a front- and delayline, which are characterized by a very homogeneous dispersion and a very discreet design and the white finish.

At the first events in September 2019, visitors were impressed by the improvement in sound quality achieved throughout the room.

"K.M.E. offers acoustically and visually suitable PA solutions with sophisticated accessories for all installation situations," says Markus Zimmermann, one of the managing directors of bildundtonstudio GbR, summarizing the long-standing, successful collaboration with K.M.E..

Bildundtonstudio GbR on Facebook

Donau-Lauchert-Halle Sigmaringendorf (Germany) Products used

Hybrid Source Element QH 5045 V2

The single hybrid array unit QH 5045 V2 (newly developed high frequency unit) has a dispersion of 50° horizontal and 45° vertical. The hybrid array element is an absolute novelty in the combination of line source and point source technologies. The QH 5045 V2 contains four 1“ high frequency drivers which are coherently working on a waveguide guaranteeing a precise dispersion and seamless transition of the high frequencies between the array elements. The two hornloaded mid range systems are equipped with 10“ neodymium speakers. In this system the requirements for compact dimensions, highest SPL and defined dispersion of a line array are combined in a symbiosis. The QH 5045 V2 is optimized for clustering of maximum three units both in groundstacking and flying mode. Furthermore, thanks to the integrated flange, the operation on a high stand is possible.

Compact Speaker for Installation ICS 5 white

The ICS 5 is characterized by its uniform tonal playback through the complete dispersion angle. A special waveguide is used to achieve this homogeneous radiation for high frequencies as well. For a speaker of this class
the slim design is remarkable. In spite of its small form factor the ICS 5 can be used for fullrange applications to play back music as well as for speech reproduction. The subwoofers IB 210 and IB 15 can be used as low extension of the ICS 5.